Skip to main content

John Deere will close two Iowa factories and move sprayer and harvester lines

Deere will shut Ottumwa and Clarion, move Hagie sprayers to Louisiana and sugar cane harvesters to Brazil. No job numbers disclosed.

John Deere will close two Iowa factories and move sprayer and harvester lines

Deere announced on 4 November 2026 a set of changes to its United States manufacturing operations, saying it continually evaluates its manufacturing footprint as markets and customer expectations change. The company framed the move as aligning production capacity with regional demand and concentrating investment in modern, high use facilities. The announcement lands three weeks before Deere reports its fourth quarter and full year 2026 results on 25 November 2026.

Five product lines move. Windrower production shifts from Ottumwa Works to Deere's Des Moines Works by the end of fiscal 2027, with round balers following by the end of fiscal 2028, after which Deere intends to close the Ottumwa factory in Iowa. Hagie STS sprayer production moves to the Thibodaux factory in Louisiana from fiscal 2028, and manufacturing at the Hagie plant in Clarion, Iowa, is intended to end by fiscal 2029. Sugar cane harvester production leaves Thibodaux for Catalao in Brazil in fiscal 2029; Thibodaux currently builds about 35 of those machines a year for the United States market. Small planter production moves from John Deere Seeding in Moline, Illinois, to Paton, Iowa, in fiscal 2027.

Deere disclosed no figure for affected jobs. It said it will work with employees, union representatives where applicable, local leaders and community stakeholders, and that it is committed to finding the best future use for the Ottumwa and Clarion sites. A company spokesperson said Deere is evaluating a range of transition support that may include internal transfer opportunities and retraining. The timing is awkward on two counts: Deere said last month it was hiring around 400 workers across seven facilities, Ottumwa among them, and the current UAW contract runs out in 2027 after workers rejected an extension that would have carried it to 2029. Deere also said its Construction and Forestry division is evaluating strategic sourcing opportunities.

The backdrop is a machinery downturn that Deere has been calling a bottom. Net income for the first nine months of 2026 came in at 3.808 billion dollars, down 4 per cent on the same period of 2025. Operating profit in the Production and Precision Agriculture segment fell to 527 million dollars in the third quarter of 2026 from 580 million dollars a year earlier. Chief executive John May has said the company continues to believe 2026 will mark the bottom of the current ag equipment cycle. Tariffs and thin farm margins hit large machinery hardest in 2026, while smaller tractors and equipment held up better.

What this means for AgTech founders: read the list of lines being moved rather than the headline. Every plant Deere is closing built low volume, specialised machines, roughly 35 sugar cane harvesters a year at Thibodaux and the Hagie self propelled sprayers at Clarion. That is precisely the band where a focused independent can still win, because the incumbent cannot justify a dedicated factory for it, and it is the band Deere is now consolidating out of its own footprint. Three practical consequences. First, OEM capital through fiscal 2029 is committed to moving existing lines into existing buildings, so a pitch that asks Deere to stand up a new programme competes against a plan that is already approved. Second, farmers running machines built at Ottumwa and Clarion will be watching parts and service continuity for the next three to five years, which is a retrofit and support opening for anyone who can serve that fleet. Third, anyone whose roadmap depends on Deere's United States output should price in the 2027 contract expiry. The cycle call matters too: if 2026 really is the bottom, the companies that come into 2027 with a product already in the field will meet the upturn, and those still raising will meet it late.

Source: AgNavigator

John Deere will close two Iowa factories and move sprayer and harvester lines

The realignment moves windrowers, round balers, Hagie sprayers, small planters and sugar cane harvesters between plants, and ends production at two Iowa sites by fiscal 2029. No job numbers were given.

By Dirk Vandenhirtz

· Precision Ag · North America · 4 min

Deere announced on 4 November 2026 a set of changes to its United States manufacturing operations, saying it continually evaluates its manufacturing footprint as markets and customer expectations change. The company framed the move as aligning production capacity with regional demand and concentrating investment in modern, high use facilities. The announcement lands three weeks before Deere reports its fourth quarter and full year 2026 results on 25 November 2026.

Five product lines move. Windrower production shifts from Ottumwa Works to Deere's Des Moines Works by the end of fiscal 2027, with round balers following by the end of fiscal 2028, after which Deere intends to close the Ottumwa factory in Iowa. Hagie STS sprayer production moves to the Thibodaux factory in Louisiana from fiscal 2028, and manufacturing at the Hagie plant in Clarion, Iowa, is intended to end by fiscal 2029. Sugar cane harvester production leaves Thibodaux for Catalao in Brazil in fiscal 2029; Thibodaux currently builds about 35 of those machines a year for the United States market. Small planter production moves from John Deere Seeding in Moline, Illinois, to Paton, Iowa, in fiscal 2027.

Deere disclosed no figure for affected jobs. It said it will work with employees, union representatives where applicable, local leaders and community stakeholders, and that it is committed to finding the best future use for the Ottumwa and Clarion sites. A company spokesperson said Deere is evaluating a range of transition support that may include internal transfer opportunities and retraining. The timing is awkward on two counts: Deere said last month it was hiring around 400 workers across seven facilities, Ottumwa among them, and the current UAW contract runs out in 2027 after workers rejected an extension that would have carried it to 2029. Deere also said its Construction and Forestry division is evaluating strategic sourcing opportunities.

The backdrop is a machinery downturn that Deere has been calling a bottom. Net income for the first nine months of 2026 came in at 3.808 billion dollars, down 4 per cent on the same period of 2025. Operating profit in the Production and Precision Agriculture segment fell to 527 million dollars in the third quarter of 2026 from 580 million dollars a year earlier. Chief executive John May has said the company continues to believe 2026 will mark the bottom of the current ag equipment cycle. Tariffs and thin farm margins hit large machinery hardest in 2026, while smaller tractors and equipment held up better.

What this means for AgTech founders: read the list of lines being moved rather than the headline. Every plant Deere is closing built low volume, specialised machines, roughly 35 sugar cane harvesters a year at Thibodaux and the Hagie self propelled sprayers at Clarion. That is precisely the band where a focused independent can still win, because the incumbent cannot justify a dedicated factory for it, and it is the band Deere is now consolidating out of its own footprint. Three practical consequences. First, OEM capital through fiscal 2029 is committed to moving existing lines into existing buildings, so a pitch that asks Deere to stand up a new programme competes against a plan that is already approved. Second, farmers running machines built at Ottumwa and Clarion will be watching parts and service continuity for the next three to five years, which is a retrofit and support opening for anyone who can serve that fleet. Third, anyone whose roadmap depends on Deere's United States output should price in the 2027 contract expiry. The cycle call matters too: if 2026 really is the bottom, the companies that come into 2027 with a product already in the field will meet the upturn, and those still raising will meet it late.

Source: AgNavigator

Back to AgTech News